Wing Bracket for Street Signs

OEM service as per customers’ request.

for customers from North America, Australia, Europe and many other countries for more than 13 years. Our good quality, crazy price and professional service make us to be the No.1 option if you need supplier from abroad.We can take charge of the whole process including producing in China and shipping the products directly to your company. Our agent in your country can deal with the customs clearance and inland transportation affairs for you. Even if your company never import, please don’t worry about it. You just need to stay in your warehouse to check our products, it’s so simple!

Street Name Sign Wing Brackets

The street name sign wing bracket is designed to hold street name signs on large round posts and poles so that the sign in perpendicular to the pole. These brackets will accommodate .080″ flat blade signs and extruded blade signs as well as 6″ and 9″ tall signs.

These wing brackets also have three 3/8" mounting holes which allow them to be installed on wood posts, and three well-defined slots that fit up to 3/4" stainless steel strapping, helping to keep the bracket in place during the installation.

This bracket can also be mounted on a 2 lbs./ft. U-Channel Post (Part # Y3434), together with 2½″ bolting set (Part # Y3465 or Y4904TS). When installing wing bracket on post, use the top and bottom holes on the bracket. Our mounting hardware is sold in sets of 2 bolts, nuts and washers. View image.

Installation steps:

1. Measure out enough stainless-steel strapping to go around the pole including an extra 12″ or so of slack.

2 .Insert one end of the strapping into your buckle or wing seal and bend about 2″ to 3″ of strapping underneath the wing seal or buckle.

3. Wrap the strapping around the pole and slide the other end of the strapping through the buckle or wing seal and bend it back so that the strapping stays in place.

4. Take your wing bracket and insert the middle of it under the strapping. Two people may be needed for this step to hold the bracket in place.

5. Tighten the strapping down with the strapping tool, making sure that the tool is against the wing seal or buckle during this step.

6. Once the strapping is tight, bend the strapping with the tool to hold the tension and use the cutter to cut off the excess strapping.

7. Fold the excess strapping over the buckle or wing seal and hammer down the wings to secure the strapping.

8. Repeat these steps to install the other two bands of strapping.

9. Place your street name sign in the bracket.

10. Tighten down the set screws using the 5/32″ hex key.

Our Services

1. Professional staffs reply your inquiry in 24 working hours.

2. Professional factory: We are manufacturer, professional engineers and staffs are specialized in producing all kinds of traffic safety products for more than 10 years.

3. Door-To-Door service is available, you just need to check the products in your warehouse.

4. OEM and ODM service are available here.

5. Competitive pricing, good quantity and timely service.

6. Sample: Available.